Wall Mount Vacuum Black


Just four inches deep, the Wall Mount Vacuum is designed to be recess mounted into a 2×4 interior wall, a cabinet or any other stable surface. This unit is quick and easy to install with the included template and instructions. No electrical cord and a direct hardwire connection give this vacuum a sleek mounting option. *No ground wire needed for installation*

In Stock

Wall Mount Vacuum Black $299.00

Flat Rate $12.95 Shipping To Australian Capital Cities

Items over 25kg will be calculated at checkout.

Guaranteed Safe Checkout

[vc_row][vc_column][vc_column_text]The Wall Mount Vacuum is designed to hang on the surface of a wall or to be flush (recessed) mounted. The remote access valve allows the power unit to be hidden away from view.

Surface mounting is by four screws or Velcro according to the provided template. The back of the vacuum cleaner has four corresponding keyholes so that the unit is locked onto the screw heads if using this option. The vacuum has a 1 meter electric cord attached so no special electric hook-up is needed.
Flush mounting can be into a 100mm (minimum depth) interior wall, a cabinet / cupboard or any other stable surface. This vacuum is easy to install, simply drill out the four corner indentations and then following the provided template, make a cut out for the unit, connect to the electrical supply and secure the vacuum with four screws.
The unit comes with a 1 meter duct hose, fittings and a remote access valve. The unit can be installed vertically, horizontally, on it’s back or side (every way apart from upside down). Once mounted the hose is connect and ducted to your chosen access point were the valve is installed. This can be through a wall, under the skirting board etc. A low volt (20 volt) cable (not supplied) connects the power unit and valve, when the vacuum hose is inserted into the valve the power unit an electrical solenoid automatically starts the vacuum.
Several optional mounting kits are available for different mounting configurations.
Up to 3 valve outlets can be added to a single power unit; it’s not hard to do but does take a bit of planning first. So if you’ve not installed in a multi valve system just contact us and send us a brief description of your plan. We need the length of run (maximum 2 meters per run), the number of valves, the type of layout (one straight run, T split with two separate runs etc) and the thickness of the walls the valves are going into. We’ll do the rest; approximate cost for the parts is £29 per additional valve.
Premium and Standard Tool Sets available separately.


400 air watts, 100 H20 lift

Made of durable Polycarbonate/ABS that will not rust or break.

High-Efficiency Micron Triple-Filtration Process

Uses Dust Bag – Part # YO8-5

Front Panel: 242mm wide x 458mm high.

Housing: 211mm wide x 416mm high x 100mm deep.

230/240 volt, 5.5 amps, 50/60 hz,  UK power cord attached[/vc_column_text][/vc_column][/vc_row]

Rated Power (Watts) 1400w
Sealed Vacuum : mmH20 | kPa 2540 (mmH20) 86.2 (inH20) | 24.9 (kPa) 248.9 (mbar)
Air Watts @motor | @ end of hose 400w
Rod/Tools/Head Size 32mm
Dust Compartment Tyoe Bagged Disposable
Warranty 1 year
Model Number RM-220-Black

Additional information